What goes where?!?! The down and dirty for putting the correct bearing and spacers where they're supposed to go. 

Micro spacers are provided with most Quick Pro frames and completes. Insert them between fig.10 and fig.11 as a way to. increase you ride height. 2 micro spacers come with each frame and/or complete bike and is approximately 1 mm thick.     

A common question we've been encountering is, "Which headset bearing goes on top and which one goes on bottom?"

This is very simple if you bearings are still in the packaging. The larger number fig.12,[45°] is on top and the smaller number fig.13, [36°] on the bottom. 

In the chance you've thrown the packaging out, don't fret, we've got you.

Both bearing with have a thick, black ring in the inner part of the bearing. On the other side, only one of the bearings with have that same thick, black ring. The bearing with BOTH black rings is the [45°], which goes on TOP.

If you have more questions, feel free to send a message to support@quickprousa.com or reach us through the store chat.